Stylus
Replacement Available: |
see (*1) |
Tracking
Ability at 15mN at 315Hz: |
70 Micron |
Output
Voltage at 1 kHz at 5.7 cm/s eff.: |
a) 0.40 mV RMS b) 0.45 mV RMS c)
0.50 mV RMS |
Channel
Separation at 1kHz / 10kHz: |
> 35 / > 30 dB |
Equivalent
Stylus Tip Mass: |
0.24 Milligram |
Vertical
Tracking Angle : |
22 Degrees |
Optimum Load
Capacitance: |
see (*2) |
Recommended
Load Impedance: |
a) 500 - 1000 Ohm b) 500 - 1000
Ohm c) 500 - 1000 Ohm |
Recommended
Eff Tone arm Mass: |
see (*3) + (*4) +
(*5) |
Moving Coil
Resistance per channel: |
a) 21 Ohm +/- 10% b) 96 Ohm +/-
10% c) 36 Ohm +/- 10% |
Extra Info:
|
(*1): Stylus replacement and other
services available on request.
(*2): Non critical.
(*3): Versions
optimized for lower tracking forces (allowing very light arms) can be built on
special request. These have a higher static compliance.
(*4): P and M
type suffix: Each of the three above mentioned main versions of The COLIBRI
are available with either: - A regular carbon-nylon plastic body. Total
cartridge weight is 6 gram. Suitable for arms with an effective tone arm mass of
8 gram to 14 gram. The plastic bodied version carries the -P suffix in its
name. - A metal body. Total cartridge weight is 7 gram. Suitable for arms
with an effective tone arm mass of 10 gram to 14 gram. The metal bodied version
carries the -M suffix in its name.
(*5): The cartridge has been optimized
regarding an EFFECTIVE tone arm mass of 11 - 12 gram. Heavier arms CAN produce
tracking and resonance problems and arms with an effective mass exceeding 16
gram WILL CERTAINLY! Please note that an extremely short cantilever and a high
tracking ability and heavy arms DUE TO PHYSICS will never yield a happy marriage |